Samsung UN40J5200AFXZA E-Manual

24 25
Connecting to a Wireless Internet Network Manually
MENU > Network > Network Settings
With networks that require a static IP address, you will need to enter the IP address, subnet mask,
gateway, and DNS values manually to connect to the network. To get the IP address, subnet mask,
gateway and DNS values, contact your Internet Service Provider (ISP).
"
Refer to the "Dynamic versus Static IP Addresses" section for more information on dynamic IP and static IP
addresses.
1.
On the Network Settings screen, set Network type to Wireless. The TV automatically displays a
list of available wireless networks.
Network Settings
Select your network type.
Network type Wireless
Wireless network
AP0000
You can connect your TV to
the internet. Please select
which wireless network to
use.
AP0001
Add Network
Refresh WPS (PBC)
2.
Select a network. If the network you want doesn’t appear in the list, select Add Network, and
enter the network’s SSID (name) manually.
3.
Using the on-screen keyboard that appears, enter the password. When finished, select Done. If
the selected network is not security-enabled, the TV will by-pass the on-screen keyboard and
attempt to connect right away.
–
To select a character on the on-screen keyboard, highlight the character and then select it.
Select Caps to view capital letters. Select the 123#& key to view additional characters.
–
To view the security password as you enter it, select Show Password.
4.
Select Stop when the TV attempts to connect to the network. Once the network connection has
been interrupted, select IP Settings.
Network Settings
Connection verification cancelled.
Wireless network connection test is stopped.
Change Network IP Settings Retry Close

Samsung UN40J5200AFXZA Specifications

General

Screen Type	led
Wall Mount	200mm x 200mm
Features	motion rate 60, wide color enhancer, anynet, connectshare movie
Tuner	digital
Screen Size	40 inches
Closed Captioning	yes
Motion Enhancement	motion rate 60
HDR	no
Built-In Speakers	true, downward firing
Surround Sound	dolby digital plus
Speakers Output	20 watts
USB Ports	1
USB 2.0 Ports	1
Ethernet	yes
RF Antenna	yes
Bluetooth	no
Network	built-in wi-fi, ethernet
Headphones Output	no
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	0
VGA Ports	0
Remote Control	smart
3D	no
Power Consumption	93 kilowatt hours
Depth with Stand	11.3 inches
Height with Stand	23.2 inches
Width with Stand	36.3 inches
Net Weight with Stand	16.3 pounds
Depth without Stand	2.3 inches
Height without Stand	20.6 inches
Net Weight without Stand	14.1 pounds