3-8
3. Disassembly and Reassemble
Description & Screws Picture Description
11
Remove the ASSY PCB MAIN.
• Gently lift up (Top Right corner) to release
the lock.
• Use both hands to hold the board and slide
to the left to release the board.
NOTE
• When installing the Main board, verify
the board is properly positioned in all 4
mounting slots.
Mounting slots (4EA)
Fixing Hole
Lift up (2EA)
Locking
Slide to the left to release the board
Lift Here to Release lock
12
Completed the disassembly.
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
To Next Page
Loading...
