3-2
3. Disassembly and Reassemble
Description & Screws Picture Description
2
Pull to remove the ASSY STAND P-TOP LEFT /
RIGHT.
3
Use "Open Jig" Tool & beginning at bottom
center of cover and working out towards the
sides.
Release each tab by pushing straight in at •
each Notch location. (keep tool towards
the right when entering each notch to help
release it.)
Now Push in on the left (right) tab location to •
release.
Pull up on bottom left (right) cover and •
insert Open Tool just above left (right) stand
bracket. Use this position to help pry open
bottom left (right) side of Cover.
4
Move up left (right) side with open tool to
release.
Jig Direction
Jig Direction
Now move Open jig across the top to release.
Jig Direction
To Next Page
Loading...
