3-1
3. Disassembly and Reassemble
3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
CAUTION
Disconnect the LED TV from the power source before disassembly.1.
Follow these directions carefully.2.
Use the Samsung Open Jig and Cushion to remove the Rear Cover. -
Open Jig Tool, Protection Cushion•
Recommended Torque for Cabinet/Stand screws : 10 ~ 12kgf -
A strength of Torque can be changed depending on the situation.•
Required Jigs & Tools
Open Jig Tool• BN81-14946A
Protection Cushion (Curved models Only)• BN81-10739A
3-1. UN**LS003AF
Description & Screws Picture Description
1
Remove the Deco (if Deco is installed).
Place the TV on the Protection Cusion.
To Next Page
Loading...
