Samsung UN55LS003AF - 3-2. One Connect Disassembly

3-6
3. Disassembly and Reassemble
3-2. One Connect
Disassembly 
Description & Screws Picture Description
1
Remove one Phillips screw in top right corner of
bottom cover.
2
Use Open Jig release bottom cover starting at
the right side tabs.
Open Jig
SMPS MAIN PCB
3
Use Open Jig release SMPS on left side and
separate SMPS (DC VSS-POWER BOARD) from
housing.
SMPS
4
Release Connector & SMPS (DC VSS-POWER
BOARD).
SMPS
5
Use Open Jig & carefully release tabs and
remove OC Board (ASSY PCB OC).
Open Jig