4-9. Motion Sensor
Factory Mode • £ SVC-Other Settings £ Motion Sensor
Check both Motion Sensor Detection & Motion Sensor Connection.1.
If motion detect, (Waving hand at sensor should vary reading), the Sensor is OK2.
If motion not detected3.
Check the 6p and switch a Function Module for 3.3Vdc. -
Main TV Board•
CN801_F (MOTION_SENSOR)
1 DGND 2 LD_SDA_I2C
3 LD_SCL_I2C 4 MOTION_NRESET
5 MOTION_INTERRUPT 6 A3.3V_PW
Motion Sensor Assembly•
Motion_Sensor
1 H_MAIN_3.3V_PW 2 H_WU_INT
3 H_MCURST 4 H_SCL2
5 H_SDA2 6 DGND
CN801_F
(MOTION_SENSOR)
Motion Sensor
Picture Direct On/O OFF
Source Direct On/O OFF
Auto Detection Group 0
Motion Sensor
Detected
Sensed Brightness : 99 (18)
Detected Object : 6.98
Internal Change : 0.12
Motion Sensor Detection
Motion Sensor Connection
Home Updates Exit
To Next Page
Loading...
