4-7-2. One Connect SMPS Test
CN802
1 12.8Vdc 2 12.8Vdc
3 12.8Vdc 4 12.8Vdc
5 GND 6 GND
7 GND 8 GND
9 GND 10 GND
[One Connect]
SMPS (DC VSS-POWER BOARD) OC Board (ASSY PCB OC)
CN802
Verify 12.8Vdc on SMPS at 1. CN802 pins 1, 2, 3, & 4
If wrong voltages remove connector & test again. 9
If still wrong voltages replace SMPS. 9
If now OK replace OC Board. 9
To Next Page
Loading...
