3-5
3. Disassembly and Reassemble
Description & Screws Picture Description
13
Remove the DC VSS-PD BOARD.
Gently lift up (Bottom Right corner) to •
release the lock.
Use both hands to hold the board and slide •
to the left to release.
NOTE
When installing the DC VSS-PD BOARD,
verify the board is properly positioned in all 4
mounting slots.
Locking Fixing Hole
Bottom chassis Guide Fixing Hole
Locking
Locking
Slide to the left to release the board
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
To Next Page
Loading...
