Samsung UN55LS003AF - Page 28

3-4
3. Disassembly and Reassemble
Description & Screws Picture Description
9
Remove the lower 2 screws of ASSY BOARD
FUNCTION.
lower 2 screws
Remove the ASSY BOARD P-FUNCTION Cable,
then remove the ASSY BOARD P-FUNCTION.
• ASSY BOARD P-FUNCTION Cable
ASSY BOARD P-FUNCTION Cable
ASSY BOARD P-FUNCTION
10
Remove the FFC Cables.
• FFC Cables
FFC Cables
11
Remove the AC Inlet Cable, then remove the AC
Inlet.
• AC Inlet Cable
AC Inlet Cable
AC Inlet
12
Remove the ASSY PCB MAIN BOARD.
Gently lift up (Top Right corner) to release •
the lock.
Use both hands to hold the board and slide •
to the left to release the board.
NOTE
When installing the ASSY PCB MAIN BOARD,
verify the board is properly positioned in all 4
mounting slots.
Locking Fixing Hole
Bottom chassis Guide Fixing Hole
Locking
Slide to the left to release the board