SCOPIA Desktop
The SCOPIA Desktop Server is typically located in the DMZ (Figure 1-3 on page 21). It therefore
has two sides to its connections, one towards the internal enterprise network while the other is
towards the public.
Figure 1-3 Locating the SCOPIA Desktop Server in the DMZ
Table 1-12 lists the ports that need to be opened on the SCOPIA Desktop Server’s connection to
the internal network.
Table 1-12 Ports to and from the SCOPIA Desktop Server connected to the internal network
Port Range Protocol Direction Severity Functionality
80 TCP Incoming Optional Used to access the SCOPIA Desktop Server web portal via a
web browser. The alternative is to configure the GUI to run
on port 443.
137/138 UDP Outgoing Recommended
for performing
Active
Directory
authentication
From SCOPIA Desktop to Active Directory in order to do auto
discovery and authentication.
139/445 TCP Outgoing Recommended
for Active
Directory
authentication
From SCOPIA Desktop to Active Directory in order to do auto
discovery and authentication.
443 TCP Incoming Mandatory Control connection between the
SCOPIA Desktop Client and
the
SCOPIA Desktop Server.
1719 UDP Outgoing Mandatory SCOPIA ECS Gatekeeper
To Next Page
Loading...
