SCOPIA VC240
Table 1-20 lists ports that need to be opened between SCOPIA VC240 and network devices.
Table 1-20 Ports supported by SCOPIA VC240
Port Protocol/Use Functionality Direction Result of Blocking
on Firewall
Description
22 TCP (SSH) iVIEW Management
Suite and for remote
software upgrades
from iVIEW
Management Suite
Both iVIEW Management
Suite does not
communicate with
the unit
SSH Server
23 TCP (Telnet) iVIEW Management
Suite and
administration
Both iVIEW Management
Suite does not
communicate with
the unit
69 TFTP Software uprgade
through the device’s
menus
Both Software upgrade
through TFTP does
not function.
TFTP Server
80 HTTP (TCP) Open APIs and remote
software uprades
either via the web
interface or via iVIEW
Management Suite
Both Web server and
open APIs do not
function.
Web-based
software upgrades
will not function
Web application or open
API-based application
161 UDP (SNMP) Configuration and
status
In Cannot configure
or check the status
of the terminal via
SNMP
SCOPIA iVIEW Network
Manager, iVIEW
Management Suite or any
other SNMP manager
station
162 UDP (SNMP) SNMP trap events Out Cannot receive
traps
SCOPIA iVIEW Network
Manager, iVIEW
Management Suite or any
other SNMP manager
station
443 HTTPS (TCP) Open APIs In Web server and
open APIs do not
function
Web application or open
API-based application
3230-3241
(configurable)
TCP (H.245) H.245 signaling Both Cannot connect
H.323 calls
Any H.323 entity.
Configure these ports on
the SCOPIA VC240 by
navigating to Setup >
Network > Port
Configuration.
To Next Page
Loading...
