How to stop odor emitting from my Samsung Vacuum Cleaner?
To address an odor coming from your Samsung Vacuum Cleaner, regularly empty the dustbin and clean the filters. Note that new vacuum cleaners may have a slight odor for the first 3 months. Accumulated dirt in the dustbin or dust on the filter can also generate an odor.
How to fix Samsung VS25C97 brush not spinning?
If the spin brush (or spin disk) of your Samsung Vacuum Cleaner accessory isn't moving: * If the 'Check Brush' message appears, turn off the vacuum cleaner and remove any foreign matter clogging the brush, then restart the vacuum cleaner. * Try turning the vacuum cleaner off and on again. * For the Slim LED Brush+ and Spray Spinning Sweeper, the motor's overheating prevention device may be enabled. Allow about 30 minutes for the motor to cool down.
How to fix Samsung Vacuum Cleaner that does not work?
If your Samsung Vacuum Cleaner isn't working, start by checking the battery level and charging it if necessary. Ensure the device is powered on by pressing the Power button. Verify the battery is correctly inserted. Also, inspect the Telescopic Pipe, dustbin, and brush for any blockages. Confirm the Washable Micro Filter is properly inserted. If the vacuum hasn't been used recently, charge the battery. If the battery is dead, it should be replaced.
Why is my Samsung VS25C97 not charging?
If your Samsung Vacuum Cleaner cannot be charged, ensure it is properly placed on the Clean Station and that the Clean Station is correctly plugged in. Verify that the voltage provided to the Clean Station matches its requirements. Check that the vacuum cleaner is turned on and that the LED of the battery level indicator is on. Remove any foreign matter from the charging terminal using a cotton swab or soft cloth. Also, check if you have turned the Lighting option off in the SmartThings app.
Samsung Vacuum Cleaner: cannot turn on vacuum cleaner on SmartThings app?
If you cannot turn on the vacuum cleaner on the SmartThings app, check if the vacuum cleaner is offline on the SmartThings app. Also, try connecting the wireless router with the Clean Station again by referring to the ‘SmartThings app’ section in the user manual.
SmartThings app won't connect to my Samsung VS25C97 Vacuum Cleaner, what do I do?
If you've installed the SmartThings app but are failing to connect with the Clean Station, refer to the ‘SmartThings app’ section in the user manual to connect the Clean Station to a wireless router. Check the Bluetooth connection. You can also try pressing and holding the Clean Station’s START/STOP button for 5 seconds. Note that the Clean Station’s START/STOP button blinks red for 5 seconds when the Bluetooth is not connected and blinks in blue for 5 seconds when the Bluetooth is connected.
Why is there a delay when controlling my Samsung VS25C97 with a smartphone?
If you experience a delay when controlling your Samsung Vacuum Cleaner with a smartphone, it could be because your smartphone is not connected to the same network as the Clean Station. Response times can vary depending on the network environment.
What to do if the spin brush of my Samsung VS25C97 Vacuum Cleaner is not moving?
If the spin brush or disk of your Samsung Vacuum Cleaner accessory isn't moving, and a 'Check Brush' message appears, turn off the vacuum. Check the brush for any obstructions and remove them. Then, restart the vacuum cleaner. If that doesn't work, try turning the vacuum cleaner off and then on again. For the Slim LED Brush+ and Spray Spinning Sweeper, the motor's overheating prevention device may be enabled; allow about 30 minutes for it to cool down.
Why does my Samsung VS25C97 keep stopping?
If your Samsung Vacuum Cleaner stops during cleaning, it might be due to several reasons. The product will stop operation temporarily under certain conditions, so after correcting the cause of the problem, turn the product on again. This can occur when the dustbin is full, or when the brush, pipe, or tool is clogged. Also, using the Extension Crevice Tool for extended periods can cause this issue.
What to do if Samsung Vacuum Cleaner brush is not spinning?
If the spin brush or spin disk of your Samsung Vacuum Cleaner accessory isn't moving, and a 'Check Brush' message appears, turn off the vacuum and check the brush for any obstructions. Remove any foreign matter and restart the vacuum. If that doesn't work, try turning the vacuum cleaner off and on again. For the Slim LED Brush+ and Spray Spinning Sweeper, the motor's overheating prevention device might be enabled; allow about 30 minutes for the motor to cool down.
General| Brand | Samsung |
|---|---|
| Model | VS25C97 Series |
| Category | Vacuum Cleaner |
| Language | English |
Explains symbols like WARNING, CAUTION, NOTE and their meaning.
Provides warning regarding cancer and reproductive harm.
Covers general precautions for appliance use, including children and household use.
Details safety precautions specific to operating the vacuum cleaner.
Lists and illustrates all included and optional accessories for the vacuum cleaner.
Provides a labeled diagram of all vacuum cleaner and Clean Station components.
Instructions for installing, using, and emptying the Clean Station.
Covers charging, inserting, ejecting, and optimizing battery usage.
Explains buttons, display, suction modes, and language selection.
Details on using the accessory cradle and various vacuum cleaner attachments.
Instructions for replacing dust bags and cleaning Clean Station filters.
Guides for cleaning the dustbin, washable micro filter, and fine dust filter.
Steps for cleaning and maintaining the Active Dual Brush and Slim LED Brush+.
How to clean specific accessories like the Spray Spinning Sweeper and Pet Tool.
Guide to setting up, downloading, and connecting the SmartThings app to the vacuum.
Covers software updates, open source details, and app functions.
Provides solutions to common problems and detailed product specifications.
To Next Page