Why does my Samsung WA400 show an unbalance error?
If your Samsung Washer displays an unbalance error, it is likely due to the laundry load. Find the reason for the imbalance and solve it as directed in the user manual.
How to fix Samsung WA400 that will not start?
First, ensure the lid of your Samsung Washer is fully closed. Next, confirm that the washer is properly plugged into a working electrical outlet. Also, check that the water source faucets are completely open. Press the Start/Pause button to initiate the wash cycle. Verify that the Child Lock feature is deactivated. Lastly, inspect the fuse or reset the circuit breaker.
Why does my Samsung WA400 keep stopping?
If your Samsung Washer stops mid-cycle, first ensure it's plugged into a working electrical outlet and check the fuse or circuit breaker. Then, close the lid and press the Start/Pause button. Note that some cycles include a pause or soak period, so allow some time to see if it resumes. Finally, inspect the inlet hose screens for any obstructions.
What to do if my Samsung Washer does not drain and/or spin?
If your Samsung Washer isn't draining and/or spinning, start by checking the fuse or resetting the circuit breaker. Ensure the drain hoses are straightened to allow proper water flow. Also, make sure the lid is closed, and press the Start/Pause button to initiate the draining and spinning process.
Why is my Samsung WA400 Washer leaking water?
If your Samsung Washer is leaking water, first ensure all hose connections are securely tightened. Then, verify that the drain hose is correctly inserted and securely attached to the drainage system. Avoid overloading the washer, and use high-efficiency detergent to prevent excessive suds.
What to do if unbalanced load prevented my Samsung WA400 from spinning?
Redistribute the load in your Samsung Washer and press the Start/Pause button.
What to do if my Samsung WA400 is not draining?
To address a Samsung Washer that is not draining, turn the unit off and then on again. Select only the Spin Cycle and press the Start/Pause button to drain the water.
What to do if my Samsung WA400 is leaking water?
If your Samsung Washer is leaking water, it could be due to a couple of reasons. First, check the connections of the air hose, as leakage can occur during the spin cycle if it's out of place. Second, ensure the connecting hose to the detergent drawer is correctly connected. In both cases, check the connections.
How to fix a Samsung WA400 that will not start?
If your Samsung Washer isn't starting, try these solutions: Ensure the lid is fully closed, the washer is plugged in, and the water source faucets are open. Press the Start/Pause button. Also, verify that Child Lock is not activated. Check the fuse or reset the circuit breaker. Note that before filling, the washer clicks to check the lid lock and perform a quick drain.
What to do if my Samsung WA400 Washer leaks water?
If your Samsung Washer is leaking water, make sure all hose connections are tight and that the end of the drain hose is correctly inserted and secured to the drainage system. Avoid overloading the washer and use high efficiency detergent to prevent excessive suds.
Details on Large Capacity, AquaJet™, Digital Inverter Motor, Mist Shower, and VRT® technologies.
Explanation of Eco Plus, Pure Cycle™, My Cycle, and Smart Care functionalities.
Essential guidelines and precautions for safe operation.
Explanation of warning symbols and their meanings for user safety.
Steps for unpacking the washer and identifying its main parts.
Guidelines for selecting a proper location and necessary electrical/water requirements.
Details on drain facility, flooring, location clearances, and dimensions.
Instructions for connecting water supply hoses and the drain hose.
Steps for leveling the washer and running the calibration mode.
Guidance on loading laundry and initiating the wash cycle.
Explanation of the washer's control panel layout and indicators.
Details on Child Lock, My Cycle, and Delay Start features.
Description of various wash cycles, pre-soak, AquaJet™, Eco Plus, and Smart Care.
Guidance on using detergents, bleach, and fabric softener with the dispenser.
Instructions for cleaning the external surfaces and the internal drum.
Procedures for cleaning the detergent dispenser and using the Pure Cycle™.
Troubleshooting common issues like no start, no water, or noise.
Understanding diagnostic codes displayed by the washer.
Reference charts for fabric care symbols and wash cycle settings.
Details on limited warranty coverage for U.S.A. and Canada.
To Next Page
General