What to do if the lid on my Samsung Washer is locked or will not open?
If the lid on your Samsung Washer is locked or won't open, press the Start/Pause button to stop the washer. It may take a few moments for the lid lock mechanism to disengage.
How do I get rid of excessive suds in my Samsung WA400 Washer?
To prevent excessive suds in your Samsung Washer, use high efficiency detergent. Reduce the detergent amount for soft water, small, or lightly soiled loads. Non-HE detergent is NOT recommended.
How do I fix an unbalanced load on my Samsung WA400?
If an unbalanced load prevented your Samsung Washer from spinning, redistribute the load, then press the Start/Pause button.
What to do if my Samsung WA400 has no water or not enough water?
To resolve water not filling or insufficient water in your Samsung Washer, begin by ensuring both faucets are fully turned on. Next, straighten any kinks in the water inlet hoses. If the issue persists, the hose filter screens may be clogged; disconnect the hoses and clean the screens.
Why is my laundry load too wet at the end of the Samsung Washer cycle?
If clothes are too wet after a cycle in your Samsung Washer, select the High spin speed option. Also, try using high-efficiency detergent to reduce excessive suds. Note that very small loads can sometimes cause this issue.
Details on Large Capacity, AquaJet™, Digital Inverter Motor, Mist Shower, and VRT® technologies.
Explanation of Eco Plus, Pure Cycle™, My Cycle, and Smart Care functionalities.
Essential guidelines and precautions for safe operation.
Explanation of warning symbols and their meanings for user safety.
Steps for unpacking the washer and identifying its main parts.
Guidelines for selecting a proper location and necessary electrical/water requirements.
Details on drain facility, flooring, location clearances, and dimensions.
Instructions for connecting water supply hoses and the drain hose.
Steps for leveling the washer and running the calibration mode.
Guidance on loading laundry and initiating the wash cycle.
Explanation of the washer's control panel layout and indicators.
Details on Child Lock, My Cycle, and Delay Start features.
Description of various wash cycles, pre-soak, AquaJet™, Eco Plus, and Smart Care.
Guidance on using detergents, bleach, and fabric softener with the dispenser.
Instructions for cleaning the external surfaces and the internal drum.
Procedures for cleaning the detergent dispenser and using the Pure Cycle™.
Troubleshooting common issues like no start, no water, or noise.
Understanding diagnostic codes displayed by the washer.
Reference charts for fabric care symbols and wash cycle settings.
Details on limited warranty coverage for U.S.A. and Canada.
To Next Page
General