S
Stephen MannSep 6, 2025
Why is water not being supplied to my Samsung WA45n3050A Washer?
- MMark EverettSep 6, 2025
If water is not being supplied to your Samsung Washer, try the following: * Ensure you press START/PAUSE after selecting the water supply. * Make sure the water taps are fully open. * Check the filter net at the water supply hose connector for clogs and clean it with a toothbrush if necessary. * Verify that the water supply is not cut off; if it is, close the tap and power off the machine. * Straighten any kinks in the water supply hoses. * Open and close the door, then press START/PAUSE. * Note that low water pressure can extend the start time. * Adjust the water level using the level selector if it's too low.