Shooting options
55
Using burst modes
It can be difficult to take photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos.
Also, it can be difficult to adjust the exposure correctly and select a proper light source. In these cases, select one of the burst modes.
pASMd
Taking photos in the High-speed burst mode
1
Rotate the drive mode dial to one of the high-speed
burst options.
Option Description
10fps: Take 10 photos per second continuously.
5fps: Take 5 photos per second continuously.
3fps: Take 3 photos per second continuously.
•
You can use the flash, only when you select Single.
•
Depending on the burst mode, some face detection options are not
available.
•
In the High-speed burst mode, the Precapture mode, and the Bracket
mode, you cannot take photos in RAW format.
•
In the High-speed burst mode, the Precapture mode, and the Bracket
mode, you cannot set face detection options, some photo styles
(Sketch and Defog), Smart Filter, Tracking AF, or Smart Range.
To Next Page
Loading...
