English - 27
WASHING A LOAD OF LAUNDRY
Bubble Wash
Course Bubble function Canceling the bubble function
Cotton, Synthetics, Bedding, Quick
Wash, Water Saving
Available
Available
Wool, Baby Care, Sports Wear,
Super Eco Wash
Not available
Drying, Sanitization, Deodorization,
Rinse + Spin, Eco Drum Clean
Not available -
• A different bubble function may be applied depending the course.
Eco Bubble selection is default. Press it once to deselect bubble option, press it again to
select bubble option.
1. Open the door, place the laundry inside the wash tub and close the door.
2. Press the Power button.
3. Select a function.
4. Place the appropriate amount of detergent and fabric softener into the corresponding
compartments depending on the amount of laundry and close the detergent drawer.
• Add the appropriate amount of detergent into the detergent compartment
, and add
the fabric softener to softener compartment just under the fi ber softener base line
(MAX) of “A”.
• When the Pre Wash course is selected, add detergent into the Pre Wash compartment
as well.
• To use liquid detergent, put the liquid detergent box in the drawer.
Do not add powdered detergent into the liquid detergent box.
5. Press the Start/Pause button.
• Press the Start/Pause button to start the wash.
• The amount of the laundry is automatically detected and the laundry is washed.
• Once a washing machine operation begins, you cannot add or select the bubble function.
• Enough bubbles are generated with the specifi ed amount of detergent.
• Please clean the debris fi lter frequently. Periodic cleaning helps generate suffi cient
bubbles.
• Depending on the detergent and the laundry, the bubbles may be absorbed and seem
like a Small Load quantity.
• Although bubbles are generated once the wash begins, it may take several minutes for
users to see them.
YUKON-03073P-04_EN.indd 27YUKON-03073P-04_EN.indd 27 4/7/2016 11:31:30 PM4/7/2016 11:31:30 PM
To Next Page
Loading...
