EasyManua.ls Logo

Samsung WD1142XVM - User Manual

Samsung WD1142XVM
44 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Washing Machine
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
WD1142XVM
YUKON-03073P-04_EN.indd 1YUKON-03073P-04_EN.indd 1 4/7/2016 11:31:14 PM4/7/2016 11:31:14 PM

Table of Contents

Questions and Answers

  • L
    Lisa ToddAug 17, 2025
    Why Samsung WD1142XVM Washer will not start?
    • P
      Paula Flores DDSAug 17, 2025
      If your Samsung Washer won't start, consider the following potential solutions: * Ensure the door is firmly closed. * Verify the Washer is plugged in. * Confirm the water source faucets are open. * Press the Start/Pause Button. * Check that the Child Lock is not activated. * Also, before the Washer starts to fill, it will make a series of clicking noises to check the door lock and do a quick drain. Finally, check the fuse or reset the circuit breaker.
  • L
    lwilliamsAug 19, 2025
    What to do if Samsung WD1142XVM Washer does not drain and/or spin?
    • A
      Alexa ChristensenAug 19, 2025
      If your Samsung Washer isn't draining or spinning, try these steps: * Check the fuse or reset the circuit breaker. * Straighten the drain hoses to eliminate kinks. If there's still a drain restriction, you may need to call for service. * Ensure the door is fully closed and press the Start/Pause Button. The Washer won't tumble or spin if the door isn't closed properly. * Make sure the debris filter is not clogged.
  • R
    Rachel PriceAug 22, 2025
    What to do if Samsung WD1142XVM stops mid cycle?
    • M
      mikerodriguezAug 22, 2025
      If your Samsung Washer stops during a cycle, here are a few things to check: * Ensure the power cord is plugged into a live electrical outlet. * Check the fuse or reset the circuit breaker. * Make sure the door is fully closed, then press the Start/Pause Button to restart the Washer. It won't tumble or spin unless the door is properly closed. * Be aware that before the Washer starts to fill, it may make clicking noises as it checks the door lock and performs a quick drain. * Also, there may be a pause or soak period in the cycle, so wait briefly to see if it restarts. * Finally, inspect the screens on the inlet hoses at the faucets for any obstructions, and clean them if necessary.
  • S
    Sara LambAug 25, 2025
    What to do if Samsung WD1142XVM Washer leaks water?
    • J
      Joseph JohnsonAug 26, 2025
      If your Samsung Washer is leaking water, check these potential causes: * Ensure the door is firmly closed. * Make sure all hose connections are tight. * Verify the end of the drain hose is correctly inserted and secured to the drainage system. * Avoid overloading the Washer. * Use high efficiency detergent to prevent over-sudsing.
  • J
    Jo BellAug 27, 2025
    How to fix Samsung WD1142XVM Washer door locked?
    • C
      Catherine MurrayAug 28, 2025
      If the door of your Samsung Washer is locked or won't open, try the following: * Press the Start/Pause Button to stop the Washer. * Note that the Washer door will remain locked during the heating portion of the Sanitize Cycle. * Allow a few moments for the door lock mechanism to disengage.
  • G
    garciachristineAug 30, 2025
    Why Samsung WD1142XVM load is too wet?
    • S
      Shawn WoodAug 31, 2025
      If your laundry load is too wet after the wash cycle, try the following: * Use the High or Extra High spin speed. * Use high efficiency detergent to reduce over-sudsing. * Be aware that very small loads (one or two items) may become unbalanced and not spin out completely.
  • S
    Sheila BowmanSep 2, 2025
    Why Samsung WD1142XVM Washer has no water or not enough water?
    • K
      karenbartlettSep 2, 2025
      If your Samsung Washer isn't getting enough water, try the following: * Turn both faucets on fully. * Make sure the door is tightly closed. * Straighten the water inlet hoses. * Disconnect the hoses and clean the screens, as the hose filter screens may be clogged. * Open and close the door, then press the Start/Pause Button.
  • S
    Samuel JohnsonSep 5, 2025
    Why Samsung WD1142XVM has excessive suds?
    • M
      Mitchell SmithSep 5, 2025
      If your Samsung Washer is producing excessive suds, consider these solutions: * Use high efficiency detergent to prevent over-sudsing. * Reduce the detergent amount for soft water, small loads, or lightly soiled loads. * Note that non-HE detergent is NOT recommended.
  • N
    ncarterSep 7, 2025
    Why Samsung WD1142XVM vibrates or is too noisy?
    • A
      Alexander MartinSep 8, 2025
      If your Samsung Washer is vibrating excessively or is too noisy, consider these possible causes: * Ensure the Washer is on a level surface. Adjust the Washer feet if needed. * Verify that the shipping bolts have been removed. * Make sure the Washer isn't touching any other object. * Ensure the laundry load is balanced.
  • P
    Pamela PriceSep 13, 2025
    What to do if Samsung WD1142XVM Washer has detergent remains?
    • N
      nathantoddSep 13, 2025
      If detergent remains in the automatic dispenser of your Samsung Washer after the wash cycle, ensure that: * Your Washer is running with sufficient water pressure. * The Detergent Selector dial is in the upper position when using granular detergent.

Summary

Safety Information

What You Need to Know About Safety Instructions

Key safety guidelines and instructions for operating the appliance.

Important Safety Symbols and Precautions

Explanation of icons and safety precautions to prevent hazards.

Installation Safety Warnings

Critical warnings and precautions for safe installation of the washing machine.

Usage Safety Warnings

Essential safety advice for operating the washing machine correctly and avoiding risks.

Cleaning Safety Warnings

Setting Up Your Washing Machine

Installation Requirements

Essential requirements for electrical supply, grounding, water supply, and drainage.

Selecting Installation Location

Physical Installation Steps

Procedures for removing shipping bolts, adjusting feet, and connecting hoses.

Powering and Initial Setup

Connecting the power and running the initial calibration mode.

Washing a Load of Laundry

Basic Instructions for Washing

Using the Control Panel

Overview of the control panel buttons and their functions for selecting cycles and options.

Bubble Wash Operation

Air Wash Refresh Function

Using the Drying Course

Guide to selecting and using different drying programs and options.

Detergent and Additives Information

Troubleshooting and Information Codes

Common Washing Machine Problems

Information Codes and Solutions

Samsung WD1142XVM Specifications

General IconGeneral
BrandSamsung
ModelWD1142XVM
CategoryWasher
LanguageEnglish

Related product manuals