To Next PageTo Next PageHow to fix a Samsung WD1172XVM that won't start?
If your Samsung Washer won't start, ensure the door is firmly closed, it's plugged in, and the water source faucets are open. Press the Start/Pause button. Also, check if the Child Lock is activated. Before filling, the washer clicks to check the door lock and does a quick drain. Finally, check the fuse or reset the circuit breaker.
What to do if Samsung WD1172XVM does not drain and/or spin?
If your Samsung Washer doesn't drain or spin, first check the fuse or reset the circuit breaker. Then, straighten the drain hoses, eliminating any kinks. Ensure the door is closed and press the Start/Pause Button. Also, make sure the debris filter is not clogged. If there is a drain restriction, call for service.
Why is my Samsung Washer leaking water?
If your Samsung Washer is leaking water, make sure the door is firmly closed and all hose connections are tight. Ensure the end of the drain hose is correctly inserted and secured to the drainage system. Avoid overloading the washer and use high-efficiency detergent to prevent over-sudsing.
What to do if Samsung WD1172XVM Washer door locked or will not open?
If the door on your Samsung Washer is locked or will not open, press the Start/Pause Button to stop the washer. Note that the door will remain locked during the heating portion of the Sanitize Cycle. It may take a few moments for the door lock mechanism to disengage.
Why Samsung WD1172XVM has excessive suds?
If your Samsung Washer has excessive suds, use high-efficiency detergent to prevent over-sudsing. Reduce the detergent amount for soft water, small loads, or lightly soiled loads. Non-HE detergent is NOT recommended.
Why Samsung Washer has no water or not enough water?
If your Samsung Washer isn't filling with enough water, fully turn on both faucets and ensure the door is tightly closed. Straighten the water inlet hoses. Disconnect the hoses and clean the screens, as they may be clogged. Try opening and closing the door, then press the Start/Pause Button.
Why load is too wet at the end of the cycle in Samsung WD1172XVM?
If your load is too wet at the end of the cycle in your Samsung Washer, use the High or Extra High spin speed. Also, use high-efficiency detergent to reduce over-sudsing. Note that very small loads (one or two items) may become unbalanced and not spin out completely.
Why does my Samsung WD1172XVM Washer keep stopping?
If your Samsung Washer stops mid-cycle, ensure the power cord is plugged into a live electrical outlet and check the fuse or reset the circuit breaker. Close the door and press the Start/Pause Button. The washer makes clicking noises to check the door lock and do a quick drain. There may be a pause or soak period in the cycle, so wait briefly. Also, check the screens on the inlet hoses at the faucets for obstructions and clean them periodically.
Why is my Samsung WD1172XVM Washer vibrating or too noisy?
If your Samsung Washer is vibrating or is too noisy, ensure it is set on a level surface and adjust the feet to level it if necessary. Make sure that the shipping bolts are removed and that the washer is not touching any other object. Also, ensure the laundry load is balanced.
Why Samsung WD1172XVM Washer fills with the wrong temperature water?
If your Samsung Washer is filling with the wrong temperature water, fully turn on both faucets and make sure the temperature selection is correct. Ensure the hoses are connected to the correct faucets and flush the water lines. Check the water heater to ensure it delivers a minimum of 120 °F (49° C) hot water at the tap, and check its capacity and recovery rate. Disconnect the hoses and clean the screens, as they may be plugged. Note that the water temperature may change as the automatic temperature control feature checks the incoming water temperature, which is normal. Also, you may notice just hot and/or just cold water going through the dispenser when cold or warm wash temperatures are selected, which is a normal function of the automatic temperature control feature.
Highlights VRT™, Eco Bubble, Diamond Drum™, DD Motor, and stylish design elements.
Essential information for safe and efficient operation of the appliance.
Explains the meaning of safety symbols and basic precautions.
Ensures correct electrical connection and grounding to prevent hazards.
Covers critical safety aspects during appliance installation process.
Critical safety advice for operating the washing machine.
Advises on safe practices during appliance operation.
Critical safety advice for cleaning the appliance.
Details electrical connection and grounding safety standards.
Steps to activate, pause, and deactivate the child safety lock.
Initial checks for common problems before detailed troubleshooting.
Solutions for starting, water, vibration, and noise problems.
Explains common error codes and their solutions.
General