What to do if my Samsung Washer has insufficient water supply?
If your Samsung Washer isn't getting enough water, here's what to do: * Fully open the water tap. * Ensure the door is properly closed. * Check that the water supply hose isn't frozen, kinked, or clogged. * Make sure there is sufficient water pressure. * Verify the cold and hot water taps are properly connected. * Clean the mesh filter, as it might be clogged.
How to reduce excessive suds in my Samsung Washer?
To resolve excessive suds in your Samsung Washer, use the recommended types of detergent as appropriate. High-efficiency (HE) detergent is recommended to prevent oversudsing. Reduce the amount of detergent used for soft water, small loads, or lightly soiled loads. Non-HE detergent is not recommended.
Why does detergent remain in the detergent drawer after a Samsung WD8 T4 cycle?
If detergent remains in the detergent drawer of your Samsung Washer after a cycle, ensure the washing machine is running with sufficient water pressure. Make sure the detergent is added to the center of the detergent drawer and that the rinse cap is inserted correctly. If you're using granular detergent, make sure the detergent selector is in the upper position. You may also need to remove the rinse cap and clean the detergent drawer.
Why is there insufficient or no water supply in my Samsung Washer?
If your Samsung Washer has insufficient or no water supply, fully open the water tap. Make sure the door is properly closed. Check that the water supply hose isn't frozen, kinked, or clogged. Ensure there's sufficient water pressure. Verify that the cold and hot water taps are correctly connected. Clean the mesh filter, as it may be clogged.
Why is the load still wet after a Samsung Washer cycle?
If your Samsung Washer load is still wet at the end of a cycle, try using the High or Extra High spin speed settings. Using high-efficiency (HE) detergent can also help by reducing oversudsing. Be aware that very small loads (one or two items) can become unbalanced, preventing complete spinning. Also, check the drain hose to ensure it is not kinked or clogged, which can impede proper drainage.
Why Samsung WD8 T4 leaks water?
If your Samsung washer is leaking water, make sure the door is properly closed and all hose connections are tight. Ensure the drain hose is correctly inserted and secured to the drain system. Avoid overloading the machine and use high-efficiency (HE) detergent to prevent excessive suds. Also, inspect the drain hose to make sure it is not placed on the floor or clogged.
Why my Samsung WD8 T4 does not start?
Your Samsung Washer might not start due to several reasons. Ensure it's plugged in, the door is properly closed, and the water taps are open. Tap the start button. Check if Child Lock is activated. Before filling, it clicks and does a quick drain. Check the fuse or circuit breaker and ensure proper power supply. If a 'Low voltage detected' message appears, verify the power cord connection. Also, ensure no laundry is caught in the door. If the AddWash door is open, close it properly and tap start, or open it to add laundry, close it, and then tap start to resume.
What to do if the Samsung WD8 T4 door does not open?
If the door of your Samsung Washer won't open, press the Start/Pause button to stop the machine. Allow a few moments for the door lock mechanism to disengage; it may take up to 3 minutes after the machine has stopped or the power has been turned off. Ensure all the water in the drum has been drained. If water remains, drain the drum manually. Check if the door lock light is off, as it turns off once the washer has drained.
How to stop a Samsung WD8 T4 Washer from leaking water?
If your Samsung Washer is leaking water, start by ensuring the door is properly closed and that all hose connections are tight. Verify that the end of the drain hose is correctly inserted and securely connected to the drain system, and avoid overloading the machine. It's also recommended to use high-efficiency (HE) detergent to prevent excessive suds. Inspect the drain hose for any damage or clogs, and make sure the end of the drain hose is not placed directly on the floor.
What to do if my Samsung Washer does not drain and/or spin?
If your Samsung Washer is not draining or spinning, ensure the drain hose is straightened and not clogged. Check the debris filter for any blockages and clean it if necessary. Make sure the door is closed completely and then press the Start/Pause button. The washer won't spin if the door isn't properly closed for safety reasons. Also, ensure the drain hose isn't frozen or connected to a clogged drain system. If the washer isn't getting enough power, it may temporarily halt draining or spinning; it will resume normal operation once sufficient power is restored. Finally, confirm that the drain hose is correctly positioned based on your connection type.
General| Washing Capacity | 8 kg |
|---|---|
| Spin Speed | 1400 rpm |
| Color | White |
| Digital Inverter Motor | Yes |
| Eco Bubble Technology | Yes |
| AddWash Door | Yes |
| Quick Wash | Yes |
| Delay Start | Yes |
| Child Lock | Yes |
| Dimensions (HxWxD) | 85 cm x 60 cm x 60 cm |
| Programs | Cotton, Synthetics, Wool, Delicate |
To Next Page