31
Part Name Descriptive Picture How To Do
Door-
Hinge
①
Remove the fixing screws holding the
Door-Glass.
②
Separate the glass.
③
After removing the two screws holding the
Holder Glass, replace the Door Hinge.
④
After putting them b ack together, check
if the screws hold ing the Door Hinge is
fastened properly.
Drain
Pump
①
Insert the flat head screwdriver into the
slot on the top of the Cover Filter and
lever it down to separate it.
②
Unscrew the drain filter by turning it
counter clockwise.
- The water remaining inside could flow out.
So, put an empty bowl on the floor to hold
the water.
To Next Page
Loading...
