■ How to Level the Unit
1.Select an installation place.
► Install the unit with 10cm (4˝) or more
clearance from its surrounding walls.
2.Check if the unit is leveled.
► If the unit wabbles, adjust the leveling
legs.
3.Adjust the leveling legs.
► The 4 leveling legs should
touch the oor all together.
When the unit is not leveled
► Lift up the unit a little bit and adjust the shortest.
► Turn the leveling bolt counter clockwise as shown
in the picture above (The leveling leg gets longer.)
1-2. Precautions upon Installation
To Next Page
Loading...
