Samsung WF365BTB series - Page 19

Removal and Reassembly _ 17
Part Figure Description
Disassembling the
Pump Motor Part
1. SeparatetheFRAME-FRONTandthenremove
the2screwsxingthePUMP.
2. SeparatetheClampofthehoseconnectedto
thePUMPandthenpulltheDRAIN-HOSE.
3. SeparatetheClampofthehoseconnectedto
thePUMPandthenpulltheHOSE-AIR.
4. SeparatetheClampofthehoseconnectedto
thePUMPandthenpulltheHOSE-DRAIN.
5. SeparatethewireconnectedtothePUMP.
Removing the
Remaining Water
• Ifthewashingmachineworks,drainthewater
inthewashtubbyselectingtheSpincourse.
If the washing machine does not work, remove
the laundry from the wash tub and scoop the
remainingwateroutofthetubusingacup.