Samsung WF42H5700A Series - Drain, Flooring, and Location Considerations; Alcove or Closet Installation Clearances

ALIGNMENT AND ADJUSTMENTS
13
Diagnostic Code Check Mode
Denition of Diagnostic Code Check Mode:
- DiagnosticCodeCheckModeistobringupthestoreddiagnosticcodes(referecodesforservice
technicians).
How to Enter:
- ToentertheDiagnosticCodeCheckModewithcode“d”ashing,presstheSpinkeyduring
ServiceMode.
Board Input Test Mode:
1.ActivatetheServiceModerst.
2. Pressthe“Spinkey”keytostartErrorCodeCheckModewithCode“d”ashing.
3. Tocyclethroughtheerrorcodes,turntheRotaryCycleSelectorinonedirection(either
ClockwiseorCounterclockwise).
4. Now,whenturningtheRotarySelectorKeyinthesamedirection,itshowserrorcodesfromthe
latest.
5. Whenturningitintheoppositedirection,itshowstheerrorcodesinthereverseorder.
Toavoidriskofelectricalshock,personalinjuryordeath;disconnectpowertowasher
beforeservicing,unlesstestingrequirespower.
WARNING
Service Mode Spin
Diagnostic Code
(Techsheet)WF42H5-03387A_EN.indd 13 2013-12-24 17:12:49