Samsung WF457ARGSGR/AA - Spin Test Mode; Quick Spin Test Mode Operation

ALIGNMENT AND ADJUSTMENTS
9
Quick Spin Test Mode
Model : WF455AR*
Denition of Quick Spin Test Mode:
- QuickSpinTestModeistodoSpinCheck.(HighRPM)
How to Enter:
- DuringServiceMode,presstheDelayStart+RinseAddKeysfor3secondstoenterQuickSpinTestMode.
- Cannotenteroncethewashingcyclehasstarted.
Quick Spin Test Mode:
AsitentersintotheQuickSpinTestMode,itstartsspinningandreachestoitsmaximumRPM.
OncetheSpinspeedreachesthemaximumRPM,thespeeddropsimmediately.
ToholdQuickSpinTestMode(enteringHoldSpeedMode),presstheStart/Pausebutton.Ifthe
Start/PausebuttonispressedduringQuickSpinTestMode,itwillstopacceleratingandholdits
spinningspeedfor10minutesbeforegoingbacktoQuickSpinTestMode.
Also,tocanceltheholdandallowQuickSpinTestModetocontinue,presstheSPINKeyIfyou
PressSPINkeywhenthewashingmachineisnotinHoldSpeedMode,QuickSpinModeisexited
andServiceModeisrestored.
Model : WF457AR*
Denition of Quick Spin Test Mode:
- QuickSpinTestModeistodoSpinCheck.(HighRPM)
How to Enter:
- Press“Spin”OntheServiceMode.
- Cannotenteroncethewashingcyclehasstarted.
Quick Spin Test Mode:
AsitentersintotheQuickSpinTestMode,itstartsspinningandreachestoitsmaximumRPM.
OncetheSpinspeedreachesthemaximumRPM,thespeeddropsimmediately.
ToholdQuickSpinTestMode(enteringHoldSpeedMode),presstheStart/Pausebutton.Ifthe
Start/PausebuttonispressedduringQuickSpinTestMode,itwillstopacceleratingandholdits
spinningspeedfor10minutesbeforegoingbacktoQuickSpinTestMode.
Also,tocanceltheholdandallowQuickSpinTestModetocontinue,presstheSPINKeyIfyouPress
SPINkeywhenthewashingmachineisnotinHoldSpeedMode,QuickSpinModeisexitedand
ServiceModeisrestored.
Toavoidriskofelectricalshock,personalinjuryordeath;disconnectpowertowasher
beforeservicing,unlesstestingrequirespower.
WARNING
Delay Start + Rinse Add for 3sec or after 10 minutes
Delay Start + Rinse Add
3 sec
While a cycle is not running
While it is not in Hold Speed Mode
Service Mode
Start/PauseQuick Spin Test Mode
Hold Speed Mode
Delay Start + Rinse Add
(Techsheet)WF457AR-03152A_EN.indd 9 2012-03-07 �� 3:25:50