To Next PageTo Next PageHow to troubleshoot a Samsung Washer that will not start?
If your Samsung Washer won't start, ensure the door is firmly closed, the washer is plugged in, and the water source faucets are open. Press the Start/Pause button. Also, check the fuse or reset the circuit breaker.
What to do if my Samsung WF45H6100A does not drain and/or spin?
If your Samsung Washer does not drain or spin, check the fuse or reset the circuit breaker. Straighten the drain hoses to eliminate kinks. Ensure the door is closed and press the Start/Pause button. Also, make sure the debris filter is not clogged.
Why is my Samsung WF45H6100A Washer not filling with water or not filling enough?
If your Samsung Washer has no water or not enough water, fully turn on both faucets. Make sure the door is tightly closed and the water inlet hoses are straight. Disconnect the hoses and clean the screens, as they may be clogged. Also, try opening and closing the door, then press the Start/Pause Button.
Why is my Samsung WF45H6100A leaking water?
If your Samsung Washer leaks water, make sure the door is firmly closed and all hose connections are tight. Ensure the end of the drain hose is correctly inserted and secured to the drainage system. Avoid overloading and use high efficiency detergent to prevent over-sudsing.
What to do if the Samsung WF45H6100A Washer door is locked or will not open?
If the door of your Samsung Washer is locked or will not open, press the Start/Pause Button to stop the washer. Note that the door will remain locked during the heating portion of the Sanitize Cycle. It may take a few moments for the door lock mechanism to disengage.
What to do if the load is too wet after a Samsung Washer cycle?
If your laundry load is too wet at the end of the cycle in your Samsung Washer, use the High or Extra High spin speed. Use high efficiency detergent to reduce over–sudsing. Keep in mind that very small loads (one or two items) may become unbalanced and not spin out completely.
How to reduce excessive suds in my Samsung WF45H6100A?
If your Samsung Washer has excessive suds, use high efficiency detergent to prevent over-sudsing. Reduce the detergent amount for soft water, small or lightly soiled loads. Note that Non-HE detergent is NOT recommended.
Why does my Samsung WF45H6100A Washer have detergent remains in the dispenser?
If your Samsung Washer has detergent remains in the automatic dispenser after the wash cycle is complete, make sure your washer is running with sufficient water pressure. Also, ensure the Detergent Selector dial is in the upper position when using granular detergent.
How do I get rid of odor in my Samsung Washer?
If your Samsung Washer has an odor, excessive suds collect in nooks and crannies and can cause foul odors. Run cleansing cycles to sanitize the machine periodically (Sanitize Cycle or Self Clean+). Clean the door seal (Diaphragm) and dry the interior of your washer after the total cycle has finished.
How to fix a Samsung WF45H6100A that vibrates or is too noisy?
If your Samsung Washer vibrates or is too noisy, ensure it is set on a level surface; adjust the feet if needed. Make sure the shipping bolts are removed and that the washer isn't touching any other object. Also, ensure the laundry load is balanced.
Covers vital guidelines and precautions for the safe installation, operation, and maintenance of the appliance.
Details the meaning of warning symbols and icons used in the manual to highlight potential hazards.
Provides specific chemical hazard warnings mandated by California law for consumer safety.
Highlights severe warnings and critical safety measures required during the appliance's installation process.
Offers important cautions and recommendations for safe installation practices to prevent damage or injury.
Outlines severe warnings for operating the appliance to prevent serious injury or death.
Provides essential cautions for safe operation of the appliance to avoid minor injuries or damage.
Details critical safety warnings and precautions to follow when cleaning the washing machine.
Steps for unpacking the washer, checking for damage, and identifying its main parts.
Specifies electrical, grounding, and water supply needs for safe and proper appliance installation.
Instructions for drain hose setup and recommendations for suitable flooring.
Guidance on choosing a location and specifying clearances for alcove or undercounter installations.
Outlines required dimensions and considerations when using optional pedestals or stacking kits.
Essential notes for installers and steps for removing shipping bolts before operation.
Steps for choosing a location and proceeding with the washer's physical installation.
Detailed instructions for connecting water, drain, and performing a test run after installation.
Guide on running the calibration mode for accurate weight detection and optimal performance.
Guidance on how to load laundry effectively to ensure optimal washing performance and prevent overfilling.
A step-by-step guide for initiating and running a wash cycle on the appliance.
Explains the control panel layout and how to select appropriate wash cycles.
Details on adjusting temperature, spin speed, soil level, and other cycle options.
Information on features like Child Lock, Garment+, Delay End, and My Cycle.
Instructions for using steam wash and the ATC feature for optimal washing performance.
Recommendations for using detergents, bleach, and fabric softeners correctly in the dispenser.
Procedures for cleaning the washer's exterior, interior drum, and dispenser components.
Procedures for preparing the washer for storage and preserving its exterior finish.
Essential guides for cleaning the debris filter and door seal to maintain washer performance.
How to use the Self Clean+ cycle to effectively clean the washing machine's drum and tub.
Solutions for common problems like the washer not starting, stopping unexpectedly, or being noisy.
Troubleshooting steps for issues related to water filling, temperature, and supply.
Addresses problems with detergent dispensing, drainage, spinning, and excessive suds.
Solutions for a locked door and identifying/fixing water leaks from the appliance.
Explanation of various error codes displayed by the washer and steps to resolve them.
Solutions for problems connecting the washer or dryer to the smartphone application.
Advice on improving Wi-Fi signal strength and AP placement for stable smart feature operation.
Guides for understanding garment care symbols and selecting appropriate wash cycles.
Technical specifications, dimensions, ratings, and compliance information for the washing machine.
Outlines the terms, conditions, and duration of the limited warranty for US purchasers.
Outlines the terms, conditions, and duration of the limited warranty for Canadian purchasers.
General