Samsung WF45N5300AV - Page 15

Removal and Reassembly _ 13
Part Figure Description
Separating the Main
PCB
1. Removethe2screwsholdingtheASSYPCB-
MAINatthebackofthewashingmachine.
2. Separatethe2Hooksbypushingitrightwards.
3. Removethe2screwand2Connectorsfor
separatingGuideWire-T
4. PushtheTUBupsidetoseparateASSYPCB-
MAIN.andseparatetheASSYPCB-MAINliftingit
up.
5. Separatethe3Hooks.
6. DisconnectAllConnectorsonmainPBA.Liftup
MainPBA,ChangeSVCPart.AfterSVC,Certainly
checktheallHooksonCOVER-PCB(M)Otherwise
COVER-PCB(M)willbedisassembledduring
washingmachinerunning.