Samsung WF45N5300AF/US User Manual

38 pages

To Next Page

WASHING MACHINE (DRUM) CONTENTS

SERVICE

Manual

WASHING MACHINE

DRUM TYPE

Basic Model : WF45K6500AV/A2

(WF6500K PROJECT)

Model Name : WF45N5300AV

WF45N5300AF

WF45N5300AW

Model Code : WF45N5300AV/US

WF45N5300AF/US

WF45N5300AW/US

(WF5300N)

1. Safety Instructions

2.FeaturesandSpecications

3. Disassembly and Reassembly

4. Troubleshooting

5. PCB Diagram

6. Wiring Diagram

7. Reference

Questions and Answers:

E
Edwin CurtisAug 8, 2025
Why is my Samsung Washer showing a water supply error?
- J
  John HolderAug 8, 2025
  A water supply error on your Samsung Washer can occur for several reasons. Foreign material might be blocking the water supply valve, or the water supply valve terminal might be disconnected. Also, the warm water and rinse connectors could be incorrectly connected. Another cause can be a disconnected PCB terminal from the drain hose to the detergent drawer, or a folded or torn transparent hose. To resolve this, ensure the water supply valve is clear, check the connection of the water supply valve terminal, verify the connections of warm water and rinse connectors, and ensure all connections are correct and hoses are intact.
L
Lori CervantesAug 23, 2025
What causes a motor driving error on my Samsung WF45N5300AF/US Washer?
- J
  Jordan TorresAug 23, 2025
  A motor driving error in your Samsung Washer can stem from various causes that restrain revolutions. The PBA connector terminal or the motor spin net may not be engaged. The motor’s internal coil could be damaged, or the hall sensor terminal might be disconnected. Foreign material inside the motor, overloading due to too much laundry, a faulty PBA, a weak motor driving error from the PBA, erroneous signals from the motor hall sensor, a disconnected IPM terminal on the main PBA, a DD motor cover out of place, a disconnected PCB housing terminal, or a DD motor fault could also be responsible. This error occurs because of restrained revolutions.