Samsung WF45N5300AF/US - Troubleshooting; Error Modes

Removal and Reassembly _ 19
Part Figure Description
Disassembling the
Tub
7. RemovetheM10boltfromthemiddleoftheTUB
andseparatetheTUB-FRONTandTUB-BACK.
Disassembling the
DRUM
1. SeparatetheASSYDRUMfromTUB,remove
6M10boltsfromtheupperASSYDRUM,
disassembletheASSYFLANGESHAFT.
2. Remove12screwsfromtheoutersidesand
thenremovethetwoupperandlowerBALL
BALANCERS.
3. Remove3screwsfromtheoutersidesandthen
removethe3DRUM-LIFTERS.
-Inordertodisassemblethedrumlifterintheassemblycondition,
pierceaholewiththedrill.
-RemoveascrewfromtheoutersidesandthenremovetheDRUM-LIFTERS.
-Blockaholewithasiliconafterreplacingthedrumlifter.