Samsung WW1 M8 Series - Auto Dispense (Applicable Models Only)

Operations
English48
Operations
Auto dispense (applicable models only)
Detergent
1. To select an input level, press Dose per Wash to cycle through the settings: Less >
Standard > More.
- If you choose More, the rinse process will be added once more.
2. To select a water hardness level, press and hold Dose per Wash to cycle through the
settings: 1 (soft water) > 2 (medium water) > 3 (hard water).
3. When complete, press and hold Dose per Wash for 3 seconds to conrm your
changes.
Fabric softener
1. To select an input level, press Dose per Rinse to cycle through the settings: Less >
Standard > More.
2. To select a concentration level, press and hold Dose per Rinse to cycle through the
settings: 1 (Normal) > 2 (x2) > 3 (x3).
3. When complete, press and hold Dose per Rinse for 3 seconds to conrm your
changes.
NOTE
• If the indicator of the Detergent or Softener stays on, rell the corresponding
compartment.
• If you select WOOL the Dose per Wash/Dose per Rinse will be disabled
automatically. However, you can enable the function(s) manually after selecting a cycle.
Untitled-9 48 2018-06-29  5:12:24