Samsung WW1 T Series - User Manual

Samsung WW1 T Series

76 pages

To Next Page

To Next Page

Loading...

Washing Machine

User manual

WW1*T******/WW9*T******/WW8*T******/WW7*T******

Untitled-35 1 2021-02-17  4:07:35

Table of Contents

Other manuals for Samsung WW1 T Series

Service Manual45 pages

Questions and Answers:

A
Amy BoydSep 9, 2025
Why is there no water supply in my Samsung Washer?
- J
  Joseph HudsonSep 9, 2025
  If your Samsung Washer isn't getting water, it could be due to several reasons. Foreign material may be entering the water supply valve, or the water supply valve terminal might not be connected properly. The warm water and rinse connectors could be wrongly connected. Also, check if the PCB terminal from the drain hose to the detergent drawer is not connected, or if the transparent hose is folded or torn. Low water pressure, or a frozen water valve in winter, can also cause this issue. In this case, the water supply valve may be faulty.
J
James PattersonSep 7, 2025
Why Samsung WW1 T after a cycle, detergent remains in the detergent drawer?
- J
  Joseph OconnorSep 7, 2025
  If detergent remains in the drawer of your Samsung washer after a cycle, ensure the washing machine is running with sufficient water pressure. Make sure the detergent is added to the center of the detergent drawer and the rinse cap is inserted properly. If using granular detergent, make sure the detergent selector is in the upper position. You might also need to remove the rinse cap and clean the detergent drawer.
M
Monica JonesAug 22, 2025
Why Samsung WW1 T won't start?
- K
  kcalhounAug 22, 2025
  If your Samsung washer isn't starting, there could be several reasons. First, ensure the washing machine is properly plugged in and that the door is completely closed. Check that the water taps are open. You may need to tap and hold the start button to initiate the cycle. Also, verify that the Child Lock feature is not activated. Inspect the fuse or reset the circuit breaker, and confirm that power is being supplied correctly. A low voltage could be the issue, so double-check the power cord connection. Make sure no laundry is caught in the door. If your model has an AddWash door, ensure it's properly closed; press it firmly, then tap and hold to start. Finally, if you're adding laundry mid-cycle, close the AddWash door completely and tap and hold to resume.
E
Edward OwensSep 5, 2025
Why Samsung WW1 T excessive vibrations or makes noise?
- K
  Kimberly DavisSep 5, 2025
  Excessive vibration or noise in your Samsung washing machine can occur if the washer isn't on a level, solid floor; use the leveling feet to adjust. Ensure the shipping bolts have been removed and the washer isn't touching anything else. Check that the laundry load is balanced. The motor can cause noise during normal operation. Metal objects such as coins can cause noise; remove them from the drum or filter case after washing.
S
Sharon KeithSep 4, 2025
What to do if Samsung WW1 T Washer water supply is insufficient?
- C
  Christopher WongSep 4, 2025
  If the water supply to your Samsung Washer is insufficient, ensure the water tap is fully open. Also, make sure the door is properly closed. Check that the water supply hose is not frozen, kinked, or clogged. Verify that there is sufficient water pressure and that the cold and hot water taps are correctly connected. Clean the mesh filter, as it may be clogged.
M
Michael LeeSep 2, 2025
What to do if Samsung WW1 T Washer has insufficient water supply?
- C
  Cynthia WilliamsSep 3, 2025
  If your Samsung washer isn't getting enough water, make sure the water tap is fully open. Ensure the door is properly closed. Also, check that the water supply hose isn't frozen, kinked, or clogged. Verify that there's sufficient water pressure. Confirm that the cold and hot water taps are correctly connected. Finally, clean the mesh filter, as it might be clogged.
M
Michael AvilaSep 1, 2025
Why does my Samsung Washer show an unbalance error?
- N
  Nicole FrazierSep 1, 2025
  The unbalance error on your Samsung Washer is caused by the laundry load. Check the laundry to resolve this issue, as this occurs by laundry.
G
gibsonbrandonAug 31, 2025
Why Samsung WW1 T Washer excessive suds?
- C
  Crystal EvansAug 31, 2025
  Excessive suds in your Samsung washer can be due to using the wrong type of detergent. Use the recommended types of detergent as appropriate, and opt for high efficiency (HE) detergent to prevent oversudsing. Reduce the detergent amount for soft water, small loads, or lightly soiled loads. Non-HE detergent is not recommended.
S
Steve YangAug 30, 2025
Why Samsung WW1 T stops?
- J
  jonesmeganAug 30, 2025
  If your Samsung washer stops mid-cycle, ensure the power cord is plugged into a live electrical outlet and check the fuse or reset the circuit breaker. Close the door and tap and hold the start button. There may be a pause or soak period in the cycle, so wait briefly. Make sure the mesh filter of the water supply hose is not clogged. Insufficient power can also cause the washer to stop temporarily.
M
Michael PalmerAug 28, 2025
Why Samsung Washer water supply is insufficient, or no water is supplied?
- L
  lisa51Aug 28, 2025
  If your Samsung washer isn't getting enough water, fully open the water tap and ensure the door is properly closed. Check that the water supply hose isn't frozen, kinked, or clogged, and that there is sufficient water pressure. Make sure the cold and hot water taps are properly connected. You may also need to clean the mesh filter, as it could be clogged.

Samsung WW1 T Series Specifications

General

Digital Inverter Motor	Yes
Eco Bubble Technology	Yes
Quick Wash	Yes
Delay Start	Yes
Child Lock	Yes
Capacity	9 kg
Spin Speed	1400 rpm
Color	White
Energy Rating	A+++
Dimensions (HxWxD)	850 x 600 x 550 mm

Summary

Safety Information

Understanding Safety Instructions

Explains the importance of safety instructions and manual usage.

Important Safety Symbols

Defines symbols used in the manual for warnings and cautions.

Important Safety Precautions

Lists essential precautions to reduce risk of fire, shock, or injury.

Critical Installation Warnings

Highlights warnings related to the installation process.

Installation Cautions

Critical Usage Warnings

Warns about potential hazards during appliance operation.

Usage Cautions

Installation

Installation Requirements

Outlines necessary conditions for electrical supply, grounding, and water.

Select Installation Location

Remove Shipping Bolts

Adjust Levelling Feet

Instructions for adjusting levelling feet for stability and proper operation.

Connect Water Hose

Detailed steps for connecting the water hose to the tap and machine.

Connect to Non-Threaded Tap

Guide for connecting the water hose to non-threaded taps using an adapter.

Position Drain Hose

Power On Procedure

Before You Start

Initial Setup and Calibration

Guides through first-time setup, language selection, and machine calibration.

Laundry Guidelines

Load Capacity and Detergent Type

Operations

Control Panel Overview

Details the functions of each button and display element on the control panel.

Operating a Cycle

Step-by-step guide on how to select and operate a wash cycle.

Cycle Overview

Additional Functions

Special Features

SmartThings Connectivity

Maintenance

Drum Clean+ Cycle

Emergency Drain Procedure

Filter Maintenance

Troubleshooting

Checkpoints for Common Issues

Common problems and their basic troubleshooting steps.

Information Codes and Errors

Explains error codes displayed on the screen and their solutions.

Specifications

Related product manuals

Preview: Samsung WW1 B Series

Samsung WW1 B Series

Samsung WW1 CB Series

Samsung WW1 M8 Series

Samsung WW1 T4 Series

Preview: Samsung WW7-T Series

Samsung WW7-T Series

Samsung WW9 T Series

Preview: Samsung WW8 T Series

Samsung WW8 T Series

Samsung WD1 T Series

Preview: Samsung WD8 T Series

Samsung WD8 T Series

Preview: Samsung WD7 T Series

Samsung WD7 T Series

Preview: Samsung WD9 T Series

Samsung WD9 T Series

WF1704W5(A/C/D/F/G/H/R/S/T/V/W/Z)