English
Maintenance
English52
Emergency drain
In case of a power failure, drain the water inside the drum before taking out the laundry.
1. Power off and unplug the washing machine from
the electrical outlet.
2. Open the filter cover (A).
- TYPE 1: Gently press the top area of the filter
cover (A) to open.
- TYPE 2: Push down the latch of the filter cover
(A) to open.
3. Put an empty, spacious container around the
cover, and stretch the emergency drain tube to the
container while holding the tube cap (B).
4. Open the tube cap and let water in the emergency
drain tube (C) flow into the container.
5. When done, close the tube cap, and reinsert the
tube. Then, close the filter cover.
NOTE
Use a spacious container because the water in the
drum may be more than expected.
Untitled-1 52 2022-10-05 11:44:05
To Next Page
Loading...
