Samsung WW5000J - Page 21


  

5. ReleasetheBANDRING(3EA)and
removetheHOSE(3EA).
6. Disconnectthewire.
7. PushtheTUBinwardslightlytoremovethe
PUMP.
 Pumpwireharnessisconnectedtomain
wireharness.
4 
1.SeparatetheDrainFilterandcheckifanyaliensubstancesareinsidethepump
(e.g.coins,buttons..,etc.)→Removetheseiffound.
2.Checkifthewiredrivingthepumphascomeloose→Taketherelevantcountermeasure
ifnecessary.
3.Whenwaterleaks,checktheassemblystatusoftheClampHose,andCapDrain→
Taketherelevantcountermeasureifnecessary.Turntheltercounterclockwiseto
removetheremainingwater.