Samsung WW7 AG Series - Page 23

English
English 23
Connecting to a non-threaded water tap
A
B
1. Remove the adaptor (A) from the water hose (B).
2. Use a Phillips screwdriver to loosen four screws on
the adaptor.
C
3. Hold the adaptor and turn part (C) in the arrow
direction to loosen it by 5 mm (*).
C
4. Insert the adaptor onto the water tap, and then
tighten the screws while lifting the adaptor.
5. Turn part (C) in the arrow direction to tighten it.
WEB_IB_SU-PJT_WASHER-MD_SimpleUX_EN.indd 23WEB_IB_SU-PJT_WASHER-MD_SimpleUX_EN.indd 23 2023/6/19 18:28:112023/6/19 18:28:11