English
Operations
English38
Operating a cycle
1. Tap to turn on the washing machine.
2. Turn the Navigation dial to select the cycle you want.
- For more information on Cycle overview, see page 39.
3. Tap
, , or to change the default cycle settings.
4. Tap
, and then turn the Navigation dial to select additional function.
- For more information on Additional functions, see page 42.
5. Tap
to change the settings for selected additional function.
- Not all cycles have additional functions available.
6. Tap and hold
to start operation.
- Once you set the cycle you want, the screen displays a brief cycle description, maximum laundry load,
and cycle time. You can also check the cycle progress, remaining cycle time, and information codes.
To add laundry during operation
1. Tap and hold to stop operation.
2. Open the door and add laundry into the drum.
3. Close the door, and then tap and hold
again to resume the operation.
WEB_IB_SU-PJT_WASHER-MD_SimpleUX_EN.indd 38WEB_IB_SU-PJT_WASHER-MD_SimpleUX_EN.indd 38 2023/6/19 18:28:162023/6/19 18:28:16
To Next Page
Loading...
