English
Maintenance
English52
Cleaning
Surface of the washing machine
Use a soft cloth with a nonabrasive household detergent. Do not spray water onto the washing machine.
Mesh filter
Clean the mesh filter of the water hose once or twice a year.
1. Turn off the washing machine, and unplug the
power cord.
2. Close the water tap.
3. Loosen and disconnect the water hose from the
back of the washing machine. Cover the hose with
a cloth to prevent water from gushing out.
4. Use pliers to pull out the mesh filter from the inlet
valve.
5. Submerge the mesh filter deeply in water so that
the threaded connector is also submerged.
6. Dry the mesh filter completely in the shade.
7. Reinsert the mesh filter into the inlet valve, and
reconnect the water hose to the inlet valve.
8. Open the water tap.
NOTE
If the mesh filter is clogged, an information code of āCheck water supplyā appears on the screen.
WEB_IB_SU-PJT_WASHER-MD_SimpleUX_EN.indd 52WEB_IB_SU-PJT_WASHER-MD_SimpleUX_EN.indd 52 2023/6/19 18:28:182023/6/19 18:28:18
To Next Page
Loading...
