EasyManua.ls Logo

Samsung WW7 AG Series - Page 61

Samsung WW7 AG Series
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
English61
Code Action
LC, LC1
Check the drain hose.
Make sure the end of the drain hose is not placed on the floor.
Make sure the drain hose is not clogged.
If the information code remains, contact a customer service centre.
3C
Check the drum motor for operation.
Try restarting the cycle.
If the information code remains, contact a customer service centre.
3CP
The electronic control needs to be checked.
Try restarting the cycle.
If the information code remains, contact a customer service centre.
UC
Check the pulsator motor for operation.
Check if power is supplied properly.
If the information code remains, contact a customer service centre.
Low voltage detected.
Check if the power cord is plugged in.
If the information code remains, contact a customer service centre.
HC
High temperature heating check.
If the information code remains, contact a customer service centre.
1C
The Water Level sensor is not working properly.
Turn the machine off, and restart the cycle.
If the information code remains, contact a customer service centre.
AC
Check communications between main and sub PBAs.
Turn the machine off, and restart the cycle.
If the information code remains, contact a customer service centre.
8C
The MEMS sensor is not working properly.
Turn the machine off, and restart the cycle.
If the information code remains, contact a customer service centre.
AC6
Check communications between the main and the inverter PBAs.
Depending on the state, the machine may automatically returns to normal
operation.
Turn the machine off, and restart the cycle.
If the information code remains, contact a customer service centre.
DC1
The Main Door lock/unlock is not working properly.
Turn the machine off, and restart the cycle.
If the information code remains, contact a customer service centre.
If any information code keeps appearing on the screen, contact a local Samsung service centre.
WEB_IB_SU-PJT_WASHER-MD_SimpleUX_EN.indd 61WEB_IB_SU-PJT_WASHER-MD_SimpleUX_EN.indd 61 2023/6/19 18:28:192023/6/19 18:28:19

Related product manuals