Samsung WW8*J3 Series - Operations; Control Panel

English 29
Operations
Operations
Control panel
01
05
02
03 04 06 07
08
09
01 Cycle Selector Turn the dial to select a cycle.
02 Display
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
03 Temp. Press to change the water temperature for the current cycle.
04 Spin
Press to change the spinning speed for the current cycle.
• Rinse Hold (No indicator): The nal rinse process is suspended so
that the laundry remains in the water. To unload the laundry, run
a drain or spin process.
• No Spin
: The drum does not spin after the nal drain process.
05 Options
Press to select an option from Intensive, Prewash, and Rinse+.
Press again to deselect.
06 Delay End
Delay End lets you set the end time of the current cycle. Based
on your settings, the start time of the cycle will be determined
by the machine’s internal logic. For example, this setting is useful
for programming your machine to nish a wash at the time you
normally return home from work.
• Press to choose a preset unit of hours.
07 Soak
Select this function to effectively remove stains from the laundry by
adding the soaking time to the current cycle.
• This function is only available with 5 cycles: Cotton, Synthetics,
Denim, Baby Care and Sports Wear.
08 Power Press to turn on/off the washing machine.
09 Start/Pause Press to start or stop operation.
WW3000J-03581J-01 (SEPM)_EN (U.K)_150424.indd 29 2015-04-24  7:47:40