To Next Page
S
Stephen Garcia Jr.Sep 8, 2025
Why is my Samsung WW8*J6 Washer filling with the wrong water temperature?
- DDavid NormanSep 8, 2025
If your Samsung Washer is filling with the wrong water temperature, fully open both taps and verify the temperature selection is correct. Ensure the hoses are connected to the correct taps and flush the water lines. Check that the water heater is set to a minimum of 120 °F (49 °C) and verify its capacity and recovery rate. Clean the mesh filter in the hoses. Note that the automatic temperature control may cause temperature changes or dispenser behavior during filling, which is normal.
General
