Why does my Samsung WW90T604DAB/SA show an unbalance error?
The unbalance error on your Samsung Washer is caused by the laundry load. Check the laundry to resolve this issue, as this occurs by laundry.
How to fix a Samsung Washer that does not start?
If your Samsung Washer doesn't start, ensure it's properly plugged in, the door is fully closed, and the water taps are open. Press and hold the start button. Also, verify that Child Lock is deactivated and that no laundry is caught in the door. It's normal for the washer to make clicking noises and do a quick drain before filling. Check the fuse or circuit breaker and ensure proper power supply. For 'AddWash door is open' message, close the AddWash door properly and press and hold the start button.
Why is water supply insufficient in my Samsung WW90T604DAB/SA Washer?
If your Samsung washer has insufficient or no water supply: * Fully open the water tap. * Make sure the door is properly closed. * Ensure the water supply hose is not frozen, kinked, or clogged. * Confirm there's sufficient water pressure. * Check that the cold and hot water taps are correctly connected. * Clean the mesh filter, as it may be clogged.
Why Samsung WW90T604DAB/SA Washer fills with the wrong water temperature?
If your Samsung washer is filling with the wrong water temperature, fully open both taps and ensure the temperature selection is correct. Verify the hoses are connected to the correct taps and flush the water lines. The water heater should supply a minimum of 49 °C hot water. Also, disconnect the hoses and clean the mesh filter. Note that the water temperature may change during filling as the automatic temperature control feature checks the incoming water temperature.
Why is my Samsung Washer making so much noise?
Excessive vibrations or noise from your Samsung Washer can stem from several factors. First, ensure the washer is on a level, solid, and non-slippery floor, adjusting the leveling feet if needed. Verify that the shipping bolts have been removed. Make sure the washer isn't touching any other objects. An unbalanced laundry load can also cause this issue; redistribute the items. Normal motor operation, clothes with metallic decorations, or metal objects like coins may also generate noise. If only one or two items are being washed, this can cause unbalance.
What to do if Samsung Washer door does not open?
If the door of your Samsung washer won't open, tap and hold the start button to stop the machine. It may take a few moments for the door lock to disengage. The door will not open until 3 minutes after the washer has stopped or the power has been off. Ensure all water in the drum is drained and that the door lock light is off.
What to do if Samsung WW90T604DAB/SA Washer leaks water?
If your Samsung washer is leaking water, ensure the door is properly closed and all hose connections are tight. Make sure the drain hose is correctly inserted and secured to the drain system, and avoid overloading the machine. Using high efficiency (HE) detergent can also help prevent oversudsing, which can cause leaks. Check the drain hose to ensure it is not placed on the floor or clogged.
What to do if Samsung WW90T604DAB/SA Washer does not drain and/or spin?
If your Samsung washer isn't draining or spinning, ensure the drain hose is straight and the debris filter isn't clogged. Close the door and tap and hold the start button. Make sure the drain hose isn't frozen or connected to a clogged drain system. Insufficient power can also cause this issue; the washer should resume normal operation once power is restored. Also, verify the drain hose is correctly positioned.
Why Samsung WW90T604DAB/SA Washer does not start?
Your Samsung washer might not start for several reasons. Ensure it's plugged in, the door is properly closed, and the water taps are open. Tap and hold the start button. Check that Child Lock isn't activated. The washer clicks and does a quick drain before filling. Also, check the fuse or circuit breaker and ensure proper power supply. If the “DDC” message appears, close the AddWash door properly and tap and hold the start button again.
Why won't my Samsung Washer start?
If your Samsung Washer doesn't start, first ensure it's properly plugged in and the door is completely closed. Also, check that the water taps are open and Child Lock is not activated. You may need to tap and hold to start the washing machine. Before filling, the machine clicks and does a quick drain to check the door lock. Verify the fuse or circuit breaker and ensure proper power supply. If a 'Low voltage detected' message appears, check the power cord. Make sure no laundry is caught in the door. For AddWash models, close the AddWash door properly and tap and hold to start or resume operation.
General| Model | WW90T604DAB/SA |
|---|---|
| Type | Front Load Washer |
| Capacity | 9 kg |
| Spin Speed | 1400 RPM |
| Energy Efficiency Class | A+++ |
| Dimensions (H x W x D) | 850 x 600 x 550 mm |
| Noise Level (Spinning) | 72 dB |
| Digital Inverter Motor | Yes |
| Quick Wash | Yes |
| Eco Bubble Technology | Yes |
| AddWash | Yes |
To Next Page