Fax menu
216
3. Useful Setting Menus
5
Receiving setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 34).
To change the menu options:
• Press (fax) > (Menu) > Fax Setup > Receiving on the
control panel.
Dial Mode
Sets the dialing mode to either tone or pulse. This
setting may not be available depending on your
country.
Item Description
Receive Mode Selects the default fax receiving mode.
Ring to Answer
Specifies the number of times the machine rings before
answering an incoming call.
Stamp Rcv Name
Automatically prints the page number, and the date
and time of reception at the bottom of each page of a
received fax.
Item Description
Rcv Start Code
Initiates fax reception from an extension phone
plugged into the EXT socket on the back of the
machine. If you pick up the extension phone and hear
fax tones, enter the code. It is preset to *9* at the
factory.
Auto Reduction
Automatically reduces an incoming fax page to fit the
size of the paper loaded in the machine.
Discard Size
Discards a specific length from the end of the received
fax.
Junk Fax Setup
Blocks any unwanted faxes that you stored in the
memory as junk fax numbers. This setting may not be
available depending on your country.
DRPD Mode
Enables a user to use a single telephone line to answer
several different telephone numbers. You can set the
machine to recognize different ring patterns for each
number. This setting may not be available depending
on your country (see "Receiving faxes using DRPD
mode" on page 259).
Duplex Print
a
Prints the received fax data on both sides of the paper.
You can save the paper usage.
Change Default
Resets the value or setting to the printer’s out-of-box
state.
Item Description
To Next Page
Loading...
