19
1. Introduction
Control panel overview
This control panel may differ from your machine depending on its model.
There are various types of control panels.
1
Toner LED
Shows the status of the toner (see "Toner LED/
WPS LED/ Power LED/ Eco LED" on page 72).
2
Eco
Enters Eco mode to reduce toner consumption
and paper usage (see "Eco options" on page 42).
3 Configuration
sheet
Prints a demo page and network configuration
report (see "Printing a demo page" on page 25).
WPS
a
Configures the wireless network connection
easily without a computer (see "Wireless
network setup" on page 115).
4
Cancel Stops an operation at any time and there are
more functions.
• Cancels the current job.
• Prints demo page: Press and hold this
button for about 2 seconds until the status
LED blinks slowly, and release.
• Supplies Info & Usage Counter: Press and
hold this button for about 6 seconds and
release.
• Prints configuration reports/network
configuration reports: Press and hold this
button for about 4 seconds until the status
LED blinks fast, and release.
5
Power/
Wakeup
You can turn the power on/off or wake the
machine up from the power save mode with this
button.
6 Status LED Indicates the status of your machine (see
"Understanding the LED" on page 70).
a. M301xDW only.
To Next Page
Loading...
