Media and tray
32
2. Basic Setup
5
Printing on special media
The table below shows the special media usable in each tray.
The paper setting in the machine and driver should match to print without a
paper mismatch error.
• You change the paper setting set in the machine from Samsung Easy Printer
Manager program or SyncThru™ Web Service.
- If you machine is connected to the local, you can set the machine’s
setting from Samsung Easy Printer Manager > Advanced Setting >
Device Settings (see "Using Samsung Easy Printer Manager" on page
177).
- If your machine is connected to the network, you can set the machine’s
setting from SyncThru™ Web Service > Settings tab > Machine
Settings (see "Using SyncThru™ Web Service" on page 170).
• When using special media, we recommend you feed one sheet at a time
(see "Print media specifications" on page 76).
• Printing the special media (Face up)
If special media are printed out with curl, wrinkles, crease, or black bold
lines, open the rear cover and try printing again. Keep the rear cover
opened during printing.
To see for paper weights for each sheet, refer to "Print media specifications" on
page 76.
(●: Supported, Blank: Not supported)
Types Tray Manual feeder
Plain ●●
Thick ●●
Thicker ●
Thin ●●
Bond ●●
Color ●
CardStock ●●
Labels ●
Transparency ●
Envelope ●
Thick Envelope ●
Preprinted ●
Cotton ●
Recycled ●●
Archive ●●
To Next Page
Loading...
