8. After searching, the window shows the wireless network devices. Select the name (SSID) of the access point you want to use and click Next.
If you cannot find the network name you want to choose, or if you want to set the wireless configuration manually, click Advanced Setting.
Enter the wireless Network Name: Enter the SSID of the access point (SSID is case-sensitive).
Operation Mode: Select Infrastructure.
Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key can access the network.
WPA Personal or WPA2 Personal: Select this option to authenticate the print server based on a WPA Pre-Shared Key. This uses a shared secret key (generally
called Pre Shared Key pass phrase), which is manually configured on the access point and each of its clients.
To Next Page
Loading...
