ManualsAndTutorials www.manualsandtutorials.com
From Offical Samsung Page. All right reserved.
SAMSUNG XPRESS SL-M2022 | User Guide
The machine is unable to find the network name (SSID) you have selected or entered. Check the network name (SSID) on your access point and try connecting
again.
Your access point is not turned on. Turn on your access point.
Connecting Failure - Invalid Security
Security is not configured correctly. Check the configured security on your access point and machine.
Connecting Failure - General Connection Error
Your computer is not receiving a signal from your machine. Check the USB cable and your machine’s power.
Connecting Failure - Connected Wired Network
Your machine is connected with a wired network cable. Remove the wired network cable from your machine.
Connecting Failure - Assigning the IP address
Cycle the power for the access point (or wireless router) and machine.
PC Connection Error
The configured network address is unable to connect between your computer and machine.
For a DHCP network environment
The receives the IP address automatically (DHCP) when computer is configured to DHCP.
If the printing job is not working in DHCP mode, the problem may be caused by the automatically changed IP address. Compare the IP address between
the product's IP address and the printer port's IP address.
How to compare:
1. Print the network information report of your printer, and then check the IP address (see Printing a network configuration report).
2. Check the printer port's IP address from your computer.
a. Click the Windows Start menu.
o For Windows 8, from the Charms, select Search > Settings.
b. For Windows XP/Server 2003, select Printer and Faxes.
o For Windows Server 2008/Vista, select Control Panel > Hardware and Sound > Printers.
o For Windows Server 2008 R2, select Control Panel > Hardware > Devices and Printers.
o For Windows 7/ Windows 8, select Control Panel > Devices and Printers.
c. Right-click your machine.
d. For Windows XP/2003/2008/Vista, press Properties.
For Windows 7/ Windows 8 or Windows Server 2008 R2, from context menus, select the Printer properties.
To Next Page
Loading...
