Samsung Xpress SL-M2830DW - Updating Firmware; Update the Firmware by Using the USB Port; Update the Firmware by Using the Network

4.Troubleshooting
4.1.6.UpdatingFirmware
Thischapterincludesinstructionsforupdatingtheprinterrmware.Y oucanupdatetheprinterrmwarebyusingone
ofthefollowingmethods:
•UpdatethermwarebyusingtheUSBport.
•UpdatethermwarebyusingtheNetwork.
4.1.6.1.UpdatethermwarebyusingtheUSBport
Upgradingpreparations
•usblist2.exe:Toolwhichsendsrmwaredatatoprinter.
•Firmwareletoupdate.
UpgradeProcedure
1)Turnthemachineoff.
2)ConnectUSBcabletoprinter.
3)Turnthemachineon.Checkiftheprinteristhereadystatus.
4)DragtheSWUPGRADE_ON.prnleanddropdownontheusblist2.exe.
5)Dragthermwareleanddropdownontheusblist2.exe.
Andthenrmwareupdatewillbestartedautomatically.
6)Whenupgradingiscompleted,machineisautomaticallyre-booting.
4.1.6.2.Updatethermwarebyusingthenetwork
Upgradingpreparations
•WiredorWirelessNetworkconnectionisestablished.
•Firmwareletoupdate
Copyright©1995-2013SAMSUNG.Allrightsreserved.4-15