4 S&C Instruction Sheet 682-510
Safety Information
Several types of safety-alert messages may appear throughout this instruction sheet and on
labels and tags attached to the remote supervisory Vista Underground Distribution Switchgear.
Familiarize yourself with these types of messages and the importance of these various signal words:
DANGER
“DANGER” identifies the most serious and immediate hazards that will likely result in serious
personal injury or death if instructions, including recommended precautions, are not followed�
WARNING
“WARNING” identifies hazards or unsafe practices that can result in serious personal injury
or death if instructions, including recommended precautions, are not followed�
CAUTION
“CAUTION” identifies hazards or unsafe practices that can result in minor personal injury if
instructions, including recommended precautions, are not followed�
NOTICE
“NOTICE” identifies important procedures or requirements that can result in product or property
damage if instructions are not followed�
If any portion of this instruction sheet is unclear and assistance is needed, contact the nearest
S&C Sales Ofce or S&C Authorized Distributor. Their telephone numbers are listed on S&C’s
website sandc.com, or call the S&C Global Support and Monitoring Center at 1-888-762-1100.
NOTICE
Read this instruction sheet thoroughly and carefully before installing
the remote supervisory Vista Underground Distribution Switchgear�
If additional copies of this instruction sheet are required, contact the nearest S&C Sales Ofce,
S&C Authorized Distributor, S&C Headquarters, or S&C Electric Canada Ltd.
It is important that any missing, damaged, or faded labels on the equipment be replaced
immediately. Replacement labels are available by contacting the nearest S&C Sales Office, S&C
Authorized Distributor, S&C Headquarters, or S&C Electric Canada Ltd.
Understanding
Safety-Alert
Messages
Following
Safety
Instructions
Replacement
Instructions
andLabels
To Next Page
Loading...
Need help?
General
