SIDE ANCHORS
Reference illustration 2.3 below.
1. Aluminum Enclosure
2. Anchor Points for Custom Mounting & Accessories—These bolts may be removed
to access the PRO-DOCK 4 docking station's anchor points. These anchor points
are designed to be used for customization, such as attaching your SanDisk
Professional PRO-DOCK 4 docking station to a DIT cart, a "cheese plate", adding
a handle, or even an SSD holder.
NOTE: Existing screws are not designed for attaching accessories or anchoring. Anchor screws
not included. Anchor points will accept a ¼”-20 screw. The screw length will vary based on the
type of mount.
NOTE: SanDisk Professional PRO-READER devices are not included with the SanDisk Professional
PRO-DOCK 4 docking station.
Technical Specifications
SanDisk Professional
User Manual
6
To Next Page
Loading...