SanDisk PRO-DOCK 4 User Manual

5
PRO-READER DEVICES
To insert or remove a SanDisk Professional PRO-READER device, follow
the instructions below and use illustration 5.1 as a reference.
1.
PRO-DOCK 4 Docking Station Door
2.
PRO-READER Handle
NOTE: SanDisk Professional PRO-READER devices are not included with the SanDisk Professional
PRO-DOCK 4 docking station.
INSERT A PRO-READER DEVICE
To insert a PRO-READER device into the PRO-DOCK 4 docking station, follow these steps.
NOTE: If you choose to write protect the PRO-READER device, engage the Write Protect Switch on the
backside of the PRO-READER device to the locked position before inserting into the PRO-DOCK 4
docking station.
1.
Open the door by pressing on its bottom edge and then lifting up.
2.
Insert the PRO-READER device into the PRO-DOCK 4 docking station. Press the
PRO-READER device into the unit until it is
firmly connected to the inside of the
PRO-DOCK 4 docking station. Make sure the PRO-READER's handle is in the
closed position.
PRO-READER Devices
SanDisk Professional
User Manual
9

SanDisk PRO-DOCK 4 Specifications

General

Brand	SanDisk
Model	PRO-DOCK 4
Category	Docking Station
Language	English