2. Press the Previous/Fast Reverse or Next/Fast Forward Buttons to move
backwards or forwards through your music files.
3. Press once on the Play/Pause/Up Button to play the music files. Once your
selected music has played, your player will play each music file, one after another.
To pause, briefly press the Play/Pause/Up Button.
4. To change the volume of your music as it plays, push the volume button on the
right side of your player. Pressing the Volume-up Button increases the volume and
pressing the Volume-down Button decreases the volume.
5. To stop playing music, you have three choices:
■ Press and hold down the Power/Menu Button until all the dark squares
disappear under the "Powering Down" message.
■ Navigate to another song with the Previous/Fast Reverse or Next/Fast
Forward Buttons. When you stop, the song displayed onscreen will play.
■ Press the Power/Menu Button briefly to navigate the software Menu to switch
to Recorder mode. To learn about how onscreen menus work, see the
Navigating the Software Menus chapter that begins on Page 20.
Once your music starts to play, you can use the player buttons to:
■ Skip backwards or forwards to the next song by pressing once on the Previous/Fast
Reverse Button (backwards) or Next/Fast Forward Button (forwards).
■ Want to switch to another song while your music plays? Press the Power/Menu
Button to display the software menu onscreen. Press the Repeat/AB/Down Button to
scroll and highlight your menu choices. Press the Select Button to select options.
First, scroll to the Play Music item and select it. Scroll to select from a list of ways to
access music, for example, by artist, and then select your choice. Repeat this scroll
and select process to find a song. When your song is highlighted, press the Select
Button to play it.
Transferring Music
To transfer music from your computer to your player:
1. Use the USB connector cable provided with your player to connect the USB port
on your player to an open USB port on your computer. The player will appear as a
Windows Portable Device on your computer. (Can’t find the USB port on your
player? See The Basic Controls section on page 3.)
2. 2. Drag and drop music files to the player from any location on your hard drive or
use a variety of music software to transfer music to your Sansa player. For more
information on how to use specific music software, please refer to the help files
provided with each program.
Playing Music 11
▲
To Next Page
Loading...
Need help?
General
